How to
configure OSPF network on 3 routers.
1.OSPF
stands for open shortest path first. If we want to create a network with the
help of OSPF. First we take 3 routers and connect all routers with cross over
cable on Gigabit ethernet ports as given below in the picture.
2. We
assign to IP address to each port of each router which are connected to
network.
3. Now
it is time to configure OSPF for network. We configure OSPF for only connected
network. For example. Router 1 is connected to 192.168.3.0 and 192.168.2.0 with
wild card mask(0.0.0.255) so it is required to configure OSPF for these twos
networks same as router 0 and router 2 by which they are connected. For OSPF
wild card mask is required( wildcard mask for class c IP is 0.0.0.255 ). Area 0
is a backbone area of OSPF.
IF you have any query. Feel free to ask me. Comment me on below comment box for any concern.
|
|---|
Hi all, Welcome to this blog. This is time to utilize our network knowledge with practical way. We are here to help each other. Kindly help those who need your guidance and put query for concern.
-
How to create web server on packet tracer 1. In this lesson we will learn about how to create first web page on cisco packet tracer tha... -
Configuration of mail server on cisco packet tracer 1. In this tutorial we will learn how to set mail server on cisco packet trac... -
How to set IOT(AC and Solar panel) on cisco packet tracer 1. In this lesson we will learn about adding IOT devices cisco packet tr...