How to configure OSPF network on 3 routers.

How to configure OSPF network on 3 routers. 1.OSPF stands for open shortest path first. If we want to create a network with the help of OSPF. First we take 3 routers and connect all routers with cross over cable on Gigabit ethernet ports as given below in the picture. 2. We assign to IP address to each port of each router which are connected to network. 3. Now it is time to configure OSPF for network. We configure OSPF for only connected network. For example. Router 1 is connected to 192.168.3.0 and 192.168.2.0 with wild card mask(0.0.0.255) so it is required to configure OSPF for these twos networks same as router 0 and router 2 by which they are connected. For OSPF wild card mask is required( wildcard mask for class c IP is 0.0.0.255 ). Area 0 is a backbone area of OSPF. 4. Now OSPF network has been configured. We can send SNMP packet to each other. IF you have any query. Feel free to ask me. Comment me on below comment box for any concern.

How to set dynamic IP address with the help of DHCP server

Creating DHCP server First we take one server and few PCs. We connected all devices with the help of straight through cable on FastEthernet ports. 3. Now we move to DHCP server on services Tab>DHCP. Service should be on. We put pool name with default gateway and then add pool name. 4. DHCP pool has been created, it is time to check PC is getting dynamic IP or not. 5. PC is getting successfully IP from DHCP server as given in below picture. IF you have any query feel free to ask me. Kindly comment on below comment box for any concern.

Network with IOT devices

Network with IOT devices 1.Here I am going to tell you about IOT(internet of things). How do they work? How to connect these devices to each other or control by remote location. 2. Here we are taking one server, one switch and few IOTs. Straight through cable is required to connect all of these with Fast ethernet ports. 3. Now we assign IPs to each device, make sure all IPs should be in same network because it is connected by single switch, not with any layer 3 device such as router. IOT IP can be assign on config Tab FastEthernet interface. Port should be in on status as given in below picture. 4. In server IoT services should be enabled as in below snipped. 5. For next step we click on server and go to Desktop Tab. Click on IOT monitor application. 6. When we click on IoT Monitor app. It will ask you for login. So we put server IP and username and password as per your choice. Username and Password can be incorrect, so you need to sign up now. After that you need to login in each IoT device with server credentials. 7. Now we can monitor from server with the help of IoT monitor application. We can on off and fast Fan. Lamp can be turn on and turn off. Same as for webcam. IF you have any query feel free to reach me. Kindly comment on below comment box for any concern.

How to configure DHCP with one router one switch and several PCs

How to configure DHCP with one router one switch and several PCs 1.       First we take a router (layer 3 device ) one switch (layer 2 device ) and few PCs which are connected with straight through cable. We are going to use one router port (G0/0) and 7 Switch ports(F0/1-F0/7) 2.       In second step we give gateway IP Port g0/0 ( 192.168.1.1 255.255.255.0) 3.       For DHCP excluded address and pool name is required. 4.       Configuration has been done successfully we can check on each PC. You will find IP from DHCP server when we moved static to DHCP. 5.       DHCP network has been established. ICMP packets are forwarding successfully. If you have any query, feel free to reach us please comment on below comment box for concern.

How to create network for two router and two PCs with the help of RIP protocol

. 1.       First we take two routers and two PCs and join them with cross over cable  2.       Then we put IPs on PCs 192.168.1.10 and 192.168.2.10 . 3.Also we provide gateway IPs to each router’s port along with subnet mask. 4.We have to provide IPs and subnet mask to each port of each router. 5.Now we need to do routing in each router at config mode. We run network command for only connecting network. There are three networks 192.168.1.0, 192.168.3.0 and 192.168.2.0 For left router at above picture connecting networks are 192.168.1.0 and 192.168.3.0 And for right router connecting networks are 192.168.2.0 and 192.168.3.0 6. Now we can try ICMP packets to check network testability. If you have any query. Feel free to contact us. Please comment on comment box.

Pokhrayan

Hi All,

I want to tell you about small city of UP( Pokhrayan). Actually most of you don't heard the name of this city. Let me tell you about it in brief.

Pokhrayan

This town is located at middle of Kanpur Dehat Some famous places near by it, are Muqka Devi Temple Mushanagar, Ma Katyani Devi Temple. This is 15 KM far away from bank of river Yamuna and approax 80 KM from river Ganga. This is small city, less population and most of the people are educated. City is known for education center of Kanpur Dehat.

Boys and Girls come to educate here.